wiko lenny 2 recovery firmware free

wiko lenny 2 recovery firmware free


wiko lenny 2 root-cwm-twrp-wiko-lenny-2-5-1-1

Use MTK Droid to extract the scatter.txt file (assuming it can get a clear, meaningful scatter). Then use SP Flash Tool to read back a full ROM dump of the phone. Process the ROM dump with MTK Droid. During that process you can create the CWM for the phone. If you have the CWM recovery image, then flash it back to the phone using SPF. Finally, boot into recovery and flash the SuperSu v2.46 zip from your SD card and it should be fully rooted.

This whole process will take the major part of 2 hours. The key is getting the scatter.txt and CWM for the phone. If you are able to do it, post those two files so others can benefit.

Of course, all of this depends on whether the MTK 6580 chip set is compatible with MTK Droid and with SP Flash.


Anyone wanna volunteer check whether the phone works with MTK Droid and SP Flash...then giving the process a go if the compatibility checks out? There's always the risk of bricking the phone at the point you flash the custom recovery or when you install SuperSu from the zip. But you can easily revive it with the firmware backup you make with SP Flash.
 
TWRP Recovery LENNY2 Download

Download Flash Tool Here
 
How To Use Flash Tool Here

Firmware Flash Tool Download


 Well here it is folks has posted the TWRP for the phone! So no need to root the phone the hard way as indicated in my last post. Also, perhaps SP Flash is compatible with the phone (there is firmware and a flash tool provided in a link not sure if that's SP Flash or some other flash tool)can you provide some clarity here?

So the EASY way to get root is to flash the TWRP recovery to the phone (you'll need the scatter.txt file to use with SP Flash tool). Once you flash this custom recovery, download the SuperSu v2.46 to your SD card, and install it from the SD. You should be fully and properly rooted after that.

 
Remember to first make a BACKUP of your ROM with the flash tool before anything else. This way, you can recover if you make a mistake.

Could someone please post the scatter.txt for the Lenny 2? And confirm whether the flash tool in that link is SP Flash. Good luck.